How much does solar panel installation cost in 2026?

Typical range: $18,000–$27,000 (a 6–8 kW home rooftop system, fully installed, before any incentives (about $2.50–$3.50 per watt)). Updated November 2026.

Typical prices

JobTypical rangeWhat changes the price
Installed cost per watt$2.50–$3.50Panel and inverter brand, roof type and pitch, local labor and permit costs
6 kW home system$18,000–$20,200Equipment brand, number of roof faces, whether the electrical panel needs work
8 kW home system$21,000–$27,000Equipment brand, roof condition, installer overhead and sales commissions
10 kW home system$27,500–$33,600More panels and a bigger inverter; price per watt often drops a little on larger systems
Federal 30% homeowner tax creditEnded after 20252026 guides report it no longer applies to homeowner-owned systems installed in 2026; check current IRS rules

Sources: SolarReviews 2026; EnergySage 2026; Solar.com 2026; ConsumerAffairs 2026; SolarInfoPath 2026; Tesla 2026 incentives guide; IRS Residential Clean Energy Credit page.

What drives the price

Most 2026 cost guides land in the same range. SolarReviews puts the average installed cost at $3.03 per watt and about $21,816 per home. EnergySage reports an 8 kW system at around $20,960 before incentives, and Solar.com says most full home systems run $20,000 to $27,000 using a $3.36 per watt benchmark. For a typical 6 to 8 kW system, that means roughly $18,000 to $27,000 before any incentives.

Price per watt is the fairest way to compare quotes. Divide the total price by the system size in watts. A quote of $21,000 for 7 kW works out to $3.00 per watt. What moves that number: the panel and inverter brands, how many roof faces the array needs, roof pitch and material, whether your electrical panel needs an upgrade, and local permit and labor costs.

Incentives have changed. Tesla’s 2026 incentives guide and other 2026 sources report that the 30% federal Residential Clean Energy Credit expired at the end of 2025 for homeowner-owned systems. That means the before-incentive price is close to what many buyers now pay. Incentives can change again, and state or utility programs vary, so verify current tax credit rules with the IRS or a tax professional. This is general information, not tax advice.

When you compare quotes, line them up on the same facts: system size in kW, expected yearly production in kWh, equipment brands, warranty terms and who does the install. A bigger system is not always better if your roof is shaded or your usage is low. Ask each installer to show how they sized the system from your past electric bills.

The cheap quote can be a trap. A very low price per watt may mean off-brand equipment, a subcontracted crew or a short workmanship warranty. A high-pressure seller may quote savings that assume a tax credit you cannot claim. Get the full price in writing, confirm the company has a local office and license, and do not sign the same day.

Questions to ask

  • Are you the company that will install the system, or will you hand the job to a subcontractor?
  • What is the total price, the system size in kW, and the price per watt?
  • Which panel, inverter and racking brands are in the quote, and what warranties come with each?
  • Who pulls the permit and handles the utility interconnection, and how long does that usually take here?
  • What does the quote assume about federal, state or utility incentives, and what happens if those do not apply?

Red flags

  • A door-to-door seller who cannot name the company that will actually do the install.
  • Pressure to sign the same day, or a ‘special price’ that expires tonight.
  • Savings math that counts on a tax credit or rebate without saying whether you qualify.
  • No local office address, no license number, or a phone number that goes to a national call center.

Find checked installers

See our solar installers shortlists by city.